mcx series ? sip ssr ? ratings to 5a @ 660 vac ? scr output for heavy industrial loads ? ac or dc control ? zero-crossing (resistive loads) or random-fire (inductive loads) output ? plastic encapsulated product selection control voltage 5a 5a 5a 3-15 vdc mcx240d5 4-15 vdc MCX380D5 mcx480d5 15-32 vdc mcxe240d5 mcxe380d5 mcxe480d5 18-36 vac mcxe240a5 90-140 vac mcx240a5 available options output specifications (1) description 240vac 380vac 480vac operating voltage (47-63hz) [vrms] 12-280 48-530 48-660 transient overvoltage [vpk] 600 1200 1200 maximum off-state leakage current @ rated voltage [marms] 0.1 0.1 0.1 minimum off-state dv/dt @ maximum rated voltage [v/sec] (2) 500 500 500 maximum load current [arms](3) 5 5 5 minimum load current [arms] 0.06 0.06 0.06 maximum surge current (16.6ms) [apk] 250 250 250 maximum on-state voltage drop @ rated current [vpk] 1.4 1.4 1.4 maximum i2t for fusing (8.3 msec) [a2sec] 260 260 260 minimum power factor (with maximum load) 0.5 0.5 0.5
input specifications (1) description mcx240dx mcx380dx mcxexxxdx mcx240a5 mcxe240a5 control voltage range 3-15 vdc 4-15 vdc 15-32 vdc 90-140 vac 18-36 vac maximum turn on voltage 3.0 vdc 4.0 vdc 15.0 vdc 90.0 vrms 18.0 vrms mimimum turn-off voltage 1.0 vdc 1.0 vdc 1.0 vdc 10.0 vrms 2.0 vdc input current @ nominal voltage 15 madc 15 madc 15 madc 10 madc 10 madc nominal input impedance 300 ohm 240 ohm 1500 ohm 14.1 ohm 2.1 k ohm maximum turn-on time [msec] (3) 1/2 cycle 1/2 cycle 1/2 cycle 10 10 maximum turn-off time [msec] 1/2 cycle 1/2 cycle 1/2 cycle 40 40 general specifications description parameters dielectric strength, input/output/base (50/60hz) 4000 vrms minimum insulation resistance (@ 500 vdc) 10 9 ohm maximum capacitance, input/output 10pf ambient operating temperature range -40 to 80 c ambient storage temperature range -40 to 125 c weight (typical) 0.7 oz. (20g) encapsulation therminally conductive epoxy general notes 1) all parameters at 25c unless otherwise specified. 2) off-state dv/dt test method per eia/narm standard rs-443, paragraph 13.11.1 3) turn-on time for random turn-on versions is 0.01 msec (dc control models). wiring diagram
mechanical specifications thermal derating information agency approvals designed in accordance with the requirements of iec 62314 e116949 rev. 111611
annex - enviromental information
|